The Walsh “style” TLS-1 by Dale Harder
The TLS-1 designed by Dale Harder.The TLS-1 by HHR Exotic Speakers is a vastly improved version of the original Ohm Walsh “F”. While the design of the TLS-1 is modeled after the old “F” series, it currently incorporates more than 61 design improvements that are the direct result of 35 years research and experience.
The New TLS-1 is intended for use in medium to large rooms from 200 to 400 square feet.
|
| Frequency Response | 29 to 22,000 Hz |
| System Resonance | 24.5 Hz |
| Sensitivity | 88 to 89 db @ 1 meter, 1 watt input |
| Driver |
12” diameter
16” high
2.1 lb. Alnico
V-7 slug
10.25 lb. magnet
10,000 gauss (1T)
|
| Impedance (nominal) | 6 ohms |
| Recommended Amplifier | 400 watts rms |
| Max Power |
3 seconds: 350 watts
30 seconds: 200 watts
Continuous: 150 watts
|
| Horizontal Dispersion | Full 360 degree sound radiation pattern |
| Vertical Dispersion | 3 db down at 50 degrees off axis @ 20 KHz. |
| Sub Sonic Filter | None |
| Protective Fuse | AGC 4 (Comes with HHR Silver Fuse) |
| Amplifier Connection | Cardas Gold binding post |
| |
| Cabinets and Grille | Hand rubbed hard wood veneers.
Finished in satin or high gloss tung oil.
Grille Black, removable. |
| Dimensions | 44” tall with grille,
19.25” by 19.25” at base
tapering to 15” by 15” at top |
| Weight | 150 lbs. |
| Recommended Room Sizes | 200 to 400 sq.ft. |
| Other Attributes |
Floor standing Tower
Fully Time and phase Coherent, no x-over, single driver
|
|
